Carved stretch ceilings: features of the production of carved structures with backlight

Thanks to new technologies, designers can realize their creative ideas. Carved ceilings are just one of them. They began to be used relatively recently, but the army of fans is growing quite rapidly. And there is a reason, because in such a non-trivial way it is possible to originally design any premises in terms of functionality - not only residential, but also administrative. In each of them, delicate shades, harmoniously combined with each other, will look amazing.

To create carved ceilings, a PVC film is used. Thanks to it, the canvases acquire good elasticity. This property is actively used by designers when decorating both houses and apartments, as well as offices, trade enterprises. High demand is noted for glossy finish both as a base and as a carved surface. Matte is also present on the market, but it is much less in demand.

Carved stretch ceilings actually consist of two layers. The first film coating - usually it is either white or colored - is the basis of the entire structure, the second coating is the “face” of the ceiling. Holes are made in it, through which the basic shade is visible. They can be located around the perimeter of the canvas, in the middle or in some corner, represent a drawing or a three-dimensional figure.

Round holes are a classic, but they, in principle, can have any geometric shape. Many believe that such a coating is short-lived and subsequently deformed due to the presence of creatively designed “punctures”. This is not so, because the holes undergo appropriate processing, special attention is paid to their edges, which gives the thread maximum strength.

When installing carved ceilings, profiles and a heat gun are used. The canvases can be located at a considerable distance, which is adjusted according to the client’s desire with the help of a profile, or fit snugly. The simplest installation option is one in which two profiles are used, they are mounted parallel to each other. It’s impossible to get the canvases very close, but please push them as far as possible. Moreover, in the appeared space, you can install lights or skip communications. By the way, such designs are not necessarily two-layer. Three or more layers will create a truly unique room design.

What images can be obtained by installing such ceilings? The most popular are butterflies and panels of flowers. Someone wants to see them all over the ceiling, someone only in the corner, especially since the rest of the space will also look beautiful due to the ornate pattern. This design is more suitable for children's rooms, bedrooms or department stores.

Birds, a sky dotted with stars, inhabitants of the deep sea can also be seen on carved ceilings. Sometimes, to make the picture look even more expressive, use three-layer paintings. Experts suggest experimenting with the size of the holes. In this way, you can draw wave-like lines, make inscriptions or portray some symbol that is meaningful to you. With carved ceilings, all these and many other dreams become reality.

Fabric or PVC stretch ceilings: how to make a choice?

Panel Views

A lot of things when choosing a suitable option for the panels depend on how high the room is designed, if the height of the walls allows, you can use parts with through slots to create volumetric decorations. For less tall rooms, solid elements with volumetric patterns are suitable, which, after installation, also give the surface a very beautiful appearance. The main materials used in the production of such parts will be:

Wood is the most expensive form of decoration and at the same time, the most beautiful.
MDF is a type of part that is not inferior in appearance to anything and costs much cheaper than natural wood.
Gypsum - the details of it are solid, without through slots, but they look very attractive, especially when you consider the not too high cost.
Plastic is the cheapest material and, accordingly, finishing with such elements will cost quite inexpensively.

There are two parameters to choose: cost and room height. If everything is approximately understandable with the price - the more expensive, the result will look more spectacular, then you need to figure out the height, since in some cases you can arrange the overlap with wooden details even in the lowest room, and in another situation, you can use any kind of decoration.

Design features

You can apply a similar ceiling in various interiors. Complex patterns and ornaments on the canvas will look attractive in a room that is decorated in an oriental style. The stylistic direction of hi-tech will be emphasized with the help of large round holes on the ceiling. Symmetrical images will look most attractive if there is a chandelier in the center of the ceiling. To create the highlight of the main background, you can use the currently popular LED strip and spotlights.

This type of ceiling decoration allows you to:

realize various design ideas,
create beautiful multi-level designs,
Create systems with volume effects.

The newest way to design is 3D art punching on the ceiling. This design will complement the room chic and make the space original. Using standard cutouts, you can create miracles on the ceiling that dramatically change the atmosphere in the room.

As a rule, a similar technique for decorating ceilings is used in offices, however, similar images will look attractive in home decoration. By using the glossy film, you can visually enlarge the room, making its interior more light and airy.

How do suspended ceilings: stages of a specialist

A beautiful tensile structure is the result of painstaking preparatory work, which is carried out in several stages:

1. The study of the premises. Specialists need to carve out the canvas in such a way as to take into account the attachment points of lighting devices, ventilation holes, pipes. The preparation of the room is also important - the cleaning of surfaces from the remains of plaster or paint, possibly even plastering the ceiling.

2. Creating a project. Data obtained as a result of a preliminary inspection of the premises is entered into the computer. Specialists based on them draw up a drawing of the future design, after which they proceed to cutting the canvas on the machine. An important point is that the canvas in size is always made smaller than the perimeter of the room, because in the process it will stretch to get a flat and smooth surface.

3. Cutting the canvas. Stretch ceilings are done manually, cutting fabric on large tables in accordance with the drawing and cutting the canvas with ordinary scissors.

4. Mounting system mounting. Most often, a harpoon, which is mounted around the entire perimeter of the canvas, and a baguette, which is mounted on the walls, are used to fasten the tensile structure.

5. Installation of a stretch ceiling. Using a heat gun, the room warms up to 40 degrees, after which the masters proceed to fasten the canvas to the baguette. To do this, first, opposite angles are fixed, and only then - the sides.

Stretch ceiling - a great way to decorate the space on your own. Entrust the design to professionals who know firsthand how stretch ceilings are made.

Equipment, tools and materials for the manufacture of ceilings

Any production requires special equipment. For the manufacture of suspended ceilings, a small number of devices are used. The required equipment includes the following:

HDTV machines (you can limit yourself to one device) - used to connect PVC sheets,
compressor,
electricity generator and accessories.

In the workshop they put special racks on which rolls with a canvas are stored. There are also tables for cutting (you can limit yourself to two), for the supply of vinyl or fabric. In addition, you will need software to do the job and at least a small supply of resources.

Ceiling sagging during poor installation

In addition to the film, complete parts are needed:

steel profiles
baguettes
harpoons and other mounts,
presspan - pressed type cardboard, which is used for spot welding,
packaging
soft and hard inserts.

Materials from Germany and France are of high quality, but at the same time high cost. Therefore, it is recommended to approach the choice on the basis of financial considerations. But the equipment is definitely better to choose not cheap, meeting European quality standards. Vinyl films are purchased of a different type and price segment - from Chinese to European.

Advantages and disadvantages

Most of the various advantages of a carved ceiling depend on the material of manufacture (film or fabric). Vinyl is moisture resistant, which makes it possible to install it in any rooms, including rooms with differences in humidity or its excess.

Someone may wonder: how will the surface hold water if it is all holey? As noted, the “openwork” layer is the outer, and the inner is the whole canvas.

The uniqueness of the film lies in the fact that it not only withstands the effects of moisture, but can also retain moisture, for example, when flooding from above. By the way, a square meter of canvas can withstand at least 80 liters.

The film is practical, allows both wet and dry cleaning. The surface is undemanding, so not only a specialized product, but also plain water will do for cleaning. What can not be said about the fabric ceiling. It is very susceptible to contamination and accumulation of dirt, which is quite difficult to remove.

The fabric is not so moisture resistant, but vapor permeable. The base base will breathe under the canvas, making it less likely that fungus will form.

Of course, the fabric is also treated with water-repellent impregnations, but their main task is to prevent the material from getting wet. That is, fabric perforated stretch ceilings will not be able to retain water for a long time.

Textile structures are inert to low and high temperature values. The minimum operating temperature is -40 ° C, maximum + 50-70 ° C. Polyvinyl chloride spoils at t below + 3 ° С.

In general, both vinyl and fabric canvases are durable. The minimum operational period is 10 years.

The main advantage of systems involving the tension of fabric or film is the lack of the need to prepare the base. They also hide any flaws and are not afraid of the natural shrinkage of the building.

The assortment of colors is quite wide, which means that you can play with shades and correctly fit them into an existing interior. There are more than enough perforation options. Combining the diameter of the holes and shades, you can get unique ceiling panels.

In addition, many openwork cutouts - a real scope for experiments with lighting. The play of light will make any design more attractive and seemingly soaring and fantastic. Many designers say that carved perforated suspended ceilings are visually indistinguishable from glass due to the play of light.

Disadvantages

Firstly, like any tensile structure, carved reduces the height of the room by at least 10 cm. Therefore, you should be extremely careful when choosing perforations for small rooms.

Secondly, ordering and installation will cost a little more, especially when it comes to fabric. Thirdly, dust will accumulate in the space between the decorative and the main layer, which cannot be removed.

In the interior

Ceilings of this type look great in large rooms, so they are often installed in restaurants, beauty salons, hotels and so on. As for the styles, carved ceilings can be used for a wide variety of interiors.

Round patterns of different sizes will be a great addition to a hi-tech room. The ceilings, decorated with calm shades and decorated with simple shapes, complement the rooms in the modernist and minimalist styles. Canvases with graceful patterns are appropriate to choose for a classic interior.

Cut-out stretch ceilings can be chosen for any room: for the living room, children, bedroom, dining room and so on. Often, experts offer an original combination of carved ornaments on the ceiling with a pattern on the walls or on the floor. A delightful effect will delight not only the owner, but also the guests.

The properties of carved stretch ceilings are aesthetics, durability and a long service life. All these characteristics directly depend on how high quality the installation was. Please note that the installation of carved ceilings requires the ability to work with special tools and knowledge of Apply technology. That is why you should not try to do the installation of carved ceilings with your own hands, it is better to immediately entrust the matter to experienced professionals.

Installation of a ceiling coating by an inexperienced craftsman can lead to damage to the material and even harm human health, since the tools necessary for installation are life-threatening. Experienced specialists will do their job quickly and efficiently.

Carved stretch ceilings are modern designs that from the first days of their existence began to gain great popularity among consumers. This demand is associated not only with the original appearance and a large number of other advantages, but also with the fact that such ceilings can be installed even in low rooms. They do not "press" on those who are in the room, but even visually increase it. You can create a cozy atmosphere in the room, which will be comfortable not only for family members, but also for all guests.

About installing lighting in a carved ceiling, see below in the video.

Features of production and cutting

After the receipt of the order indicating the exact dimensions, it is processed using special programs. This makes it possible to determine how to cut the stretch ceiling, taking into account all the features of the base base.

It is important to take the following points into account:

Is it possible to get by with a single piece, or will you have to use welding. If the room is larger than the width of the selected material, additional inserts must be cut. Welding of individual fragments takes place on a high-frequency machine. Typically, such problems arise only with PVC films, as fabric panels are large.
In order not to solder, zoning of the room space is often used. It is most convenient to use drywall constructions for this, placing them on the base surface. This will divide the base into sections with different finishes.
Some manufacturers announce the so-called "Seamless" PVC coating. There are still seams on the surface of this expensive material, they just are well disguised from visual viewing. A harpoon is used to fix them on a baguette. This allows, if necessary, to remove the decorative canvas with fasteners.

How is an ornament created?

The upper part of the ceiling is a standard PVC film, which all experts and consumers are aware of. There is nothing unusual in it. The overall impression of a stretch ceiling directly depends on the picture.

Initially, the pattern is created on the computer - in a graphical editor, where the designer selects the shape and parameters of cutouts, selects a place for them on the canvas and creates the final sketch. After that, figures of the required sizes are made on the canvas (using a laser plotter). When the pattern is cut out, the edges melt a little, which provides a high level of coating strength: the film will not tear even after years of use.

You can choose a ready-made shape (from the catalog), or you can offer your own version. If the designer confirms the possibility of producing paintings with such figures, after a few days the rooms of your apartment will be decorated with original carved ceilings.

Mounting

Before installation, you need to conduct all communications: wires for built-in lighting, chandeliers, ventilation. After this, marking of the areas where the mounting baguettes will be located is done. The height of the ceilings is marked on one wall, then with a chopping cord and a special level, the height is fixed on other walls. This markup is connected by lines, where the profile is set.

The following methods of fastening different paintings are distinguished:

Using Apply technology, if the LED backlight will be installed. Baguettes are located 40 mm apart, the thickness of the paintings reaches 120 mm.
For structures where the layers are installed close to each other, Apply 0. The ceiling height is 30 mm.
If it is necessary to install the blades at a distance of 8 mm from each other, the Apply profile 8 is required. Height - 30 mm
For rooms with high ceilings or to install structures in several levels, traditional h-baguettes are used. So the canvas can be located at different distances, and there may be several layers.

The canvas is installed in the grooves located inside. The canvas with cutouts is attached to the groove, which is located near the wall. During installation, the air in the room is heated by a heat gun, which gives the canvas elasticity, as a result of which it stretches, and installation is carried out as quickly and easily as possible.

When choosing a suitable ornament, do not forget that the circles will stretch a little when pulled and change their shape. Cloths are installed crosswise, installation starts from the corner of the room. After cooling, a flat surface with original patterns, without defects, is obtained.

Advantages and disadvantages

Tensile structures, from which multilevel systems are made, characterized by many advantages:

The carved surface is distinguished by its ability to absorb noise. Sound waves that fall into the holes of the canvas are quenched and transformed into thermal energy.
The film, which is used to create a stretch ceiling, is completely safe for the human body. It is characterized by antistatic properties and consists of non-combustible material.
You can carry out the installation yourself, following the instructions. This can be done quite quickly and without much effort.
Stretch ceiling allows you to hide existing defects of the ceiling surface, as well as hide communications.
The material used is characterized by excellent moisture resistance, which is extremely important in rooms with high humidity and in case of possible leaks.
The construction market offers a huge assortment of paintings, which can be of different colors and with all kinds of patterns.

Regardless of the type of stretch ceiling, a carved surface will look great with it. You can choose a multi-level ceiling, soaring models or canvases decorated with photo printing.
Tensile structures have a long service life. They retain their original appearance for a long period of time and do not sag.
Maintenance of such structures is minimal. You can apply dry or wet cleaning.
Stretch carved ceilings are universal. They will look optimally both in public areas and in living rooms.

The negative side of this design is its relatively high cost. You can buy a carved cloth for 1000-2500 rubles per 1 square meter. It all depends on how complicated the design was chosen. At the same time, standard film stretch ceilings cost about 300 rubles per 1 m2.

Another drawback of such a ceiling is that when it is installed, the height of the walls decreases, so do not use carved structures in low rooms.

Highlighting patterns and additional lighting

It is possible to install lighting devices not only outside the structure, but also inside it. Today, the range of lighting sources is extremely diverse. Luxurious classic chandeliers, an easy-to-use LED strip and various spotlights are available. With the correct installation of these devices, you can visually increase or decrease the height of the room.

Decorating a room with lighting is necessary when installing the ceiling, because after installing it, it will not be possible to change anything.

The creation of stylish carved ceilings provides for its initial development on a computer, where the places where the lighting will be located are taken into account. It is of two types:

outdoor
internal (more diffuse).

Using the backlight, which is mounted on a carved ceiling, you can create a 3D effect. If a matte coating was used for the base, and gloss was used for perforation, then using the installation of an LED strip, you can create a volumetric effect

The carved ceiling type, which is decorated using LEDs, will look attractive in any room. In the evening, such lamps will radically change the situation in the room. In addition, tapes with LEDs are characterized by many advantages, including:

excellent flexibility, which allows you to give the tape any desired shape,
diodes are distinguished by a long operational period, capable of serving up to 10 years,
this option is the most secure, because the tape will not cause a fire or deformation of the stretch ceiling,
the presented lighting option is very economical, since diodes require a very low amount of electricity to work,
the brightness of the LED strip is similar to standard lamps,
the width of the tape is relatively small, due to which, after its installation, the ceiling level practically does not fall,
wide color gamut, which in most cases can be controlled. There are tapes that are purchased with the remote control option. This will allow you to play with different shades - from white to deep blue.

Remember that any room should have high-quality lighting, but in a situation with a stretch ceiling this also creates a certain atmosphere. Specialists prefer LED tapes, but you can consider other options.

Characteristics of carved structures

Innovative technology allows you to move away from the usual decoration and design of ceiling coatings. This kind of coating is a multi-color stretch ceiling with cuts. They are arranged randomly or evenly, drawing original patterns.

When decorating the ceiling, several layers of film are used. The first becomes the background of the construction design, glossy or matte. The color palette of the paintings is extensive, which creates innumerable combinations. The next coating layer is contrasted in color and contains many holes.

To give even more originality to the ceiling, it is illuminated with LEDs. At the same time, tapes are installed on the base ceiling. Photos on the Internet show the beauty of such combinations.

Tension overlap in several levels, photo

Apply stretch ceilings will decorate any interior decoration of the room. Carved ceilings create unique compositions and designs. Cutouts are made of any size and shape, combined with photo printing and drawings. Multilevel constructions are also carried out - here nothing limits imagination.

Necessary equipment for the production of suspended ceilings

Equipment for the production of:

double-post high-frequency machine (for welding with high-frequency current) - 365 000 rubles,
air compressor for pneumatics (receiver 50-100l) - 20 000 rubles,
electrical equipment (cables, machines, etc.) - 15 000 rubles,
staff training + program for cutting stretch ceilings - 30 000 rubles.

Equipment for the workshop:

2 cutting tables,
film storage racks.
2 tables for feeding film to the machine,

Film Storage Racks

Estimated cost of this configuration - 80 000 rubles.

exhibition stand with product catalogs,
table, chairs,
computer, printer, telephone / fax,
stationery, etc.

56,000 rubles will be needed for office equipment.

Total, for the equipment of the premises production + office will need: 566,000 rubles.

Features of the installation of carved stretch ceilings

Prior to installation, it is necessary to qualitatively fix all the elements of communications and mount the necessary lighting, mark the places of attachment of profiles. First, the distance from the rough ceiling surface to the level at which the canvas will be installed is determined. Using the laser level, a horizontal line is drawn around the perimeter of the room.

Features of the installation of tension structures of this type are the use of four types of profiles:

H-shaped products. Ideal in those rooms where there are high ceilings, and the loss of a few centimeters of height is not critical.
APPLY 05 with a height of 3 cm. In this case, the canvas will be located at the closest possible distance from each other - only 5 mm.
APPLY - the canvases are attached tightly. The room will lose only 3 cm in height.
APPLY 40 - the distance between the fastener elements is 4 cm. It is better to install such apply profiles in high spacious rooms, since the height loss will be up to 12 cm.

First fasten the upper canvas, performing the function of the main background. A carved sheet having perforation is fixed in a groove closest to the wall. Further installation is carried out in the usual way, by heating the surface with a heat gun.

When installing a stretch ceiling, we must not forget about two main points:

If you want to reproduce carved cloths with geometric shapes that have the correct shape, you need to take into account that they are slightly deformed due to the tension of the cloth.
It is better if any holes are irregular in geometric shape.

Modern carved tensile structures are very popular today. The technologies used for teething, thanks to which the elements are smooth, are being introduced into the production by an increasing number of manufacturers of suspended ceilings. Try to install a carved ceiling in your house and your rooms will sparkle with new colors.

Stretch ceiling: what is it?

A vinyl or textile stretch ceiling mounted on an aluminum profile is durable and unpretentious material.

The advantages of this interior element are obvious: the installation of the structure is extremely simple, and its functionality is huge - from an attractive appearance to the possibility of installing a ceiling with bactericidal impregnation.

However, in addition to a flat image or photo, nothing more can be applied to a classic stretch canvas.

However, technology does not stand still - at the request of the customer, the coating can be made more voluminous due to the thread. Using a special apparatus, holes of various complexity are cut out in the material.

Carved ceilings are installed on two levels, and for each different types of paintings are used - solid and having cutouts.

The distance is calculated from the requirements of the customer, and the installation is carried out on double wall profiles, which allows you to fasten the paintings joint to joint.

This property is especially valuable in rooms with a low ceiling, as it visually expands the space of the room.

The basis of the carved ceiling is a PVC film, which acts as a background for the next decorative level.

Properly selected lighting installed behind the base of the carved ceiling adds depth and volume.

The shape of the cut out details can be any - from a rectangle or a circle to ornate patterns. Examples of work can be seen in the photo in the article.

Perforated ceiling is the best way to reflect your personality in the interior.

Stretch ceilings: subtleties and nuances of production and installation

In general, the technology for creating a beautiful and durable stretch ceiling can be described in a few words - the prepared material needs to be stretched around the perimeter of the room, and then fixed to a pre-mounted profile system. In reality, the process of manufacturing a stretch ceiling is many times more complicated and differs in its nuances and features.

Firstly, not every canvas is suitable for creating a stretch ceiling. Most often, stretch ceilings are made of PVC film, much less often - of fabric created on the basis of polyester. Secondly, working with a PVC cloth during installation is not so simple - when heated to a certain temperature, the fabric becomes elastic and comfortable to stretch, but if you just overheat it a little, it will be hard and begin to break. Therefore, the creation of ceilings is the destiny of professionals who have undergone the necessary training and know the technology for the production of tension structures to the smallest detail.

Tension Solutions

The most popular way to create carved compositions. The design of such ceilings is not too complicated - two canvases are pulled at once, one of which will be solid and will serve as a background, and the second has cutouts of the desired shape. The continuous panel is pulled higher, and the decorative part with the ornament will be the lower tier.

Since carved stretch ceilings are taught to be performed with illumination, a gap is left between the stretched panels, in which the elements of decorative lighting will be placed. An LED strip is usually used as a light source, which consumes very little electricity and does not heat up during operation.

The choice of patterns is huge, however, if you do not like any of the options in the catalog, you can independently come up with a picture to transfer it to film. Such a performance will cost more, but you will get a completely unique ceiling composition made according to your sketches.

Spots

Perfectly complement the ceiling and give it a special twist. They can emit directional light or rotate and have varying degrees of light intensity. With the help of spots you can play with the atmosphere in space.

With light bulbs

By changing the hue, a certain direction, scattering or refraction of light, light bulbs create interesting lighting effects and form an original design.

With spotlights

Spotlights give a bright high-quality light, while they look very compact and do not overload the surface of the canvas. With their help, you can organize a comfortable and cozy environment.

Spotlights

They allow you to place emphasis in the room and highlight its functional areas, as well as significantly improve the degree of illumination.

In the photo there is a small living room and a beige stretch ceiling with spotlights.

How is the installation

Despite the fact that the design looks very complicated, usually, the installation of carved stretch ceilings occurs according to the same scheme as the tension of standard coatings. First, markup is made, after that - mounting frames are installed, and then one and the second layer of coatings is stretched. In this case, only the distance between the films is of importance.

If you plan to mount a hidden backlight, then a special mounting profile is used, with a distance between the web-fixing elements of forty millimeters. A special baguette is also used to install the paintings. If the distance between the stretched films is planned to be made more than four centimeters, then two standard mounting frames are used.

Design features of a carved ceiling

Stretch ceilings of carved complex shape consist of two paintings. The first (solid or background) is made in the form of a plain plain surface made of PVC film. The second one can also be monophonic, but of a darker or lighter shade, with cut out holes in the form of different geometric shapes - circles, squares, ovals, other patterns or ornaments.

At the same time, shades of different layers of the ceiling are harmoniously combined with each other.

When creating multi-level structures of this type, the pattern on the ceiling is cut with laser equipment. The layout of the future ceiling is developed in software by designers, and modern technology implements their ideas. So that the cutouts made by the laser during installation and operation do not lose their shape and do not creep away, at the production stage they are fused at the edges.

For mounting structures with cut out elements, standard baguettes are used, which are placed one above the other, or new 3D profiles specially designed for such ceilings. It should be noted that the second ones are much easier to work with, since they are adapted specifically for these systems, and they allow you to fix two sheets at once - the top and the bottom with the perforation applied.

Design opportunities

Such a ceiling is today used in various interiors. Complex ornaments organically fit into the design of the room, made in oriental style, large round holes on the ceiling emphasize the courage of the high-tech direction. Symmetrical images look organically when combined with a chandelier in the center of the ceiling, and a variety of spotlights or LED strips are best used as the main illumination for the background canvas.

Using such solutions, you can:

Realize the most daring design ideas.
Create multi-level designs.
Make systems with volumetric effects.

3D artistic punching on suspended ceilings is the newest unique way of decorating rooms. Their main purpose is to give the space originality and chic. Standard cutouts create miracles that radically change the ceiling surface.

Typically, such a technique is used in the design of office premises, but a ceiling that has art cuts can also be installed in an apartment or house. The use of glossy films as coatings will visually increase the space, make it voluminous and airy.

Perforated Pattern Illumination

Lighting devices can be placed both inside the structure and on the outside. The variety of variations of artificial lighting sources - from classic chandeliers to LED strips and spotlights, allows you to find the right solution for visually increasing the height of the room or reducing it.

The LED strip used to illuminate perforated patterns gives bottomlessness to the ceiling and makes it voluminous.

On a note! Design and decoration of the room with lighting should be carried out at the stage of installation of the tension structure, since after completion of work, it will not be possible to change anything.

Carved stretch ceilings APPLY

This is a completely new development, with the help of which it is possible to create real masterpieces in the design of the ceiling surface.

The traditional APPLY style is represented by the top level of matte or glossy printing. Another name is the background layer. The lower level is represented by one or more paintings with decorative cutouts. Through them you can see the background canvas.

In the production of such systems, durable material is used that does not lose its original properties for a long time.

Advantages and disadvantages of carved stretch ceiling

The main advantages of such coatings include:

Good soundproofing.
Environmental friendliness, antistatic, fire safety.
Quick installation. Subject to the correct installation technology, suspended ceilings can be installed in a few hours.
Moisture resistance.
Resistance to chemicals.
Durability.
The ability to combine them with other designs.
Ease of care.

However, carved stretch ceilings have some disadvantages:

They take the height from the room, so they will look ridiculous in low rooms.
They are afraid of sudden temperature changes, since PVC film canvases are used to create such structures.
The complexity of the design and the complexity of the installation process require certain skills, so it is better to entrust this work to specialists.

Design features

The canvases are mounted parallel to each other, in several layers (various textures and shades). A color film is used on top, and pastel-colored canvases are used below. Creating an ornament begins on the computer. If the consumer approves the work, the picture is drawn up on film.

Perforation of the lower layers is carried out with a special toolthanks to which the edges become smooth and attractive. The film is stretched evenly, and even after many years it will not sag or deform.

The design of carved elements can be absolutely anything. Holes come in various sizes and shapes, they can be located on the canvas anywhere. Patterns consisting of circles of different sizes are in demand. Artistic cutouts are used to create an ornament, mirror, symmetrical patterns, as well as to obtain randomly arranged figures.

As a rule, mat materials are used for the production of cut-out paintings, and glossy products are intended for the upper layers. Thanks to mirror reflections and natural shadows on the material with gloss, the effect of great depth and a 3D picture is created, which looks very interesting.